New Homes /On April 11, 2014

Inspections Needed When Doing a Major Home Remodel

Back

Q: What inspections or building permits do I need for new construction or major remodeling?

There are a wide variety of different inspections, many of which may not be required for your particular project. Many building departments will tell you specifically which inspections you'll need to request, but if they don't, be sure that you ask when you pick up the permits. new homes for sale

Here are some of the more common inspections, as well as when they occur and what the inspector will be looking for.

Footing Inspection: This is typically the first of the inspections, and occurs after the grading has been done and the forms have been laid for the foundation, or at least for the footings. The inspector is looking to see that the footings are the proper size and depth, that any reinforcing steel is in place, and that the location of the foundation does not violate any setbacks.

Underfloor Inspection: This occurs after the foundation has been poured and the floor framing is in place, but before the subfloor is installed. This gives the inspector the opportunity to look at the floor framing, as well as any plumbing or mechanical systems that might be in place under the floor. The inspector will be looking at the size and spacing of the framing; that proper materials have been used wherever the wood meets either the concrete or the soil; and that plumbing and mechanical systems are properly sized, installed and supported.

Rough Inspections: These inspections occur after the rough framing has been completed and all the rough wiring, plumbing and mechanical components have been installed, but before any finished wall and ceiling covering is installed. These are typically the most extensive and complicated of all the inspections, since there is a lot to review and it will all be covered and inaccessible in the future.

The rough framing inspection includes an inspection of all the structural components. The inspectors will be checking that the proper size and type of lumber was used, and that the spacing is correct; that hangers and steel connections are the correct type and are installed with the proper type and quantity of fasteners; that flashings and other weatherproofing measures are in place; and that the roof, windows, exterior doors and other components are in place to make the building weather-tight.

Rough electrical inspections include checking the size and installation of all the wires; the service panel; grounding; installation and location of boxes; installation of can lights; and whether the wires are properly routed and protected. Rough plumbing inspections look at the size and type of pipe that was used; proper slope for drain pipes; vent pipe sizes and locations; size and location of water lines; and that everything is secure and well supported. Rough mechanical inspections include the size, location, and installation of all ducts and vents; installation of furnaces and ventilation fans; and the proper ducting of fans to the outside of the building.

Insulation Inspection: This inspection occurs after the wall insulation has been installed and checks to see that it is complete and of the proper R-value.

Drywall Inspection: Some cities include a drywall inspection, which occurs after the drywall has been installed but before it is taped. The inspectors are checking to see that the proper number and type of fasteners have been used to secure the drywall to walls and ceilings.

Final Inspections: When everything is done, the inspectors will make their final inspections of all systems to ensure that everything has been completed correctly. They will test different systems, check for compliance with manufacturer's specifications, and ensure that everything is operating properly and the house is safe for occupancy.

Remember that this is just a brief overview of the inspection process, and that the actual number, timing and details of the inspections can vary widely. Be sure to talk with your building department to get the specific details of the inspections for your particular project, and to get any of your questions answered before you begin.

Are you thinking about new construction? Tell us a little bit about your dream home, and we’ll arrange for a complimentary consultation with a new homes expert who can point you in the right direction!

Are you interested in hot real estate topics, tips and trends?
Click below to subscribe to our blog!

Lynnette Tully

Previous Post View All Next Post

Browse by topics

About the company

Liz Moore & Associates is a boutique real estate agency renowned for having the region's top agents, with extensive market knowledge and local expertise that is only achieved through relentless training coupled with Liz's extremely high standards for professionalism. When you're buying or selling a home, experience matters.